|
| |
 |
LeafGuard
of DELMARVA
Division of Austin's Insulation Service, Inc.
(800) 244-4382
(302) 337-3139
Fax: (302) 337-3870
 leafgard@magpage.com
Advantages of the LeafGuard Gutter Design
- One-Piece Seamless Construction with Unique Hood Covered Trough
- Will Not Clog, Maintenance Free
- One-Day Installation
- Heavy Duty Aluminum
- Most Advanced Gutter Design in 40 Years
- Attractive; Blends In With Home Design, Wide Range of Colors
- Saves You Time, Money, & Aggravation
- 20-Year Limited Finish Warranty
-
|
Get the
leaves before they get you -- with LeafGuard
Removing the leaves and pine straw from gutters is a year-round problem, especially
in the Delmarva area. In addition to the mess and aggravation, gutter cleaning can be
potentially hazardous.
Don Austin, owner of LeafGuard of Delmarva, explains, "Each year homeowners get
many scrapes, bumps, bruises, broken bones and worse while attempting to clean their
gutters. No one ever thinks they will be the one who falls off the roof or ladder while
cleaning their gutter." "So they say -- let's hire someone to do it for
us."
"This can be expensive and we sometimes forget about the liability risk we face
when someone else cleans our gutter. Are they insured? Will homeowners insurance cover
it?"
Suppose you could have a gutter that would never have to be cleaned out --
guaranteed! Imagine that.
LeafGuard of Delmarva is introducing LeafGuard Gutter Systems, the only one-piece
seamless leaf and pine straw shedding gutter system available anywhere.
Consider the purpose of an ordinary gutter. A gutter should channel rainwater runoff
from a roof and direct it to downspouts away from the foundation of the house. Such a
gutter works only if it is kept clog-free and clear of leaves and pine straw. As soon as
it becomes clogged, water will spill over or, worse yet, get behind the gutter and
possibly damage your wood fascia board behind the gutter. Up to now there has not been an
effective solution for this problem.
LeafGuard is a one-piece seamless aluminum gutter and hood, which sheds leaves, pine
straw and other debris. There is no more expense or risk in having gutters unclogged.
LeafGuard works like this: As water flows off the roof, surface adhesion makes the
water "stick" and roll over the radius hood into the gutter. Water goes into the
gutter but leaves, pine straw, and other debris shed off and fall to the ground.
The more water flowing down the roof, the better surface adhesion. In fact,
LeafGuard has been successfully tested in simulated rainfall up to 21 inches of rainfall
per hour.
Unlike other "add-on" gutter cover devices which look bulky and
unattractive and must be slid under roof shingles and fastened, LeafGuard attaches
directly to the fascia trim board of the house and won't damage your roof shingles.
Besides eliminating the need to clean out your gutters, LeafGuard is more attractive
than regular gutters. In fact, some homeowners comment that LeafGuard looks more like
decorative molding than a gutter.
|
Serving the Delmarva Peninsula and surrounding areas
(Delaware, Eastern Maryland, Eastern Virginia
If you need general information or are not in our service area, please go to
|
|
|
|
-
|
|
